LEGRAND C2G 89510 Mode D'emploi page 7

Product Diagram Description and Function (US)
L1 R1 RJ-45 Port
L2 R2 Input / Output
L3 R3 USB Connector
L4 R4 LED Indicator
L5 R5 Bidirectional IR
Extension
L6 R6 RS232 Port
L7 R7 3.5mm Stereo
Audio Connector
L8 R8 Toslink Connector
L9 R9 Power Supply
L10 R10 Grounding
L11 R11 Screw
All manuals and user guides at all-guides.com
Use a CATx cable to connect to RJ-45 port on transmitter & receiver
L2: Connect to a HDMI Source R2: Connect to a HDMI TV or monitor
L3: Connect to a USB Host R3: Connect to a USB device
L4: Green: Power on, Blue: Link OK R4: Red: Power on; Blue: Link OK; Purple: HDCP content
In: Connect to IR receiver Out: Connect to IR Blaster (Transceiver )
L6: Connect to a serial device (using a RJ11 serial cable for serial extension), or Connect to a PC (using a RJ11 firmware
R6: Connect to a serial device (using a RJ11 serial cable for serial extension), or Connect to a PC (using a RJ11 firmware
update cable for firmware update)( Dual functions: Both for Serial extension & Firmware updating use )
L7: Connect to a Audio Source R7: Connect to speaker
Connect to a Toslink Source device R8: Connect to Toslink Sink device
L9: Apply power from a power supplier to the transmitter unit R9: Power port (Not for use.)
update cable for firmware update
For grounding
For HDMI cable lock (C2G HDMI Lock P/N 40744)
6