Publicité
Les langues disponibles
Les langues disponibles
Display HE Pumpen
Fig. 2a
10 Electrical connection
Warning: Risk of death!
Improper installation and improper electrical connection can present a fatal hazard.
Hazards posed by electrical power must be eliminated.
• Only have installation and electrical connection work performed by specialist
staff and in accordance with the applicable regulations (e.g. IEC, VDE etc.).
• Incorrect installation and electrical connection can pose a fatal risk. Prevent
hazards arising from electrical energy.
• Only have installation and electrical connection performed by a specialist and in
line with the valid regulations (e.g. IEC, VDE, etc.)!
• The current type and voltage must correspond with the information on the type plate.
• Observe the specifications of local energy supplier!
• Observe accident prevention regulations!
• Never pull on the power cable
• Do not bend the cable
• Do not place any objects on the cable
• When using the pump in systems at temperatures over 90 °C,
use a connection line that is suitably heat resistant.
• Hazards such as sharp edges and burrs arise during installation.
• When transporting the pump, never hold it by the power cable.
• The pump could cause an injury if it falls.
WITA go.future LED 40-XX | 60-XX
Fig. 2b
Fig. 2c
Operating Instrutions
Fig. 2d
31
Publicité
