Venduro RA-SMALL Manuel page 33

Functionalities
A� Light button
B� Motor button
C� Filter indicator
D� Fan speed
Motor Control
Press button B to switch
on the motor to position 1� Press button B again to increase the speed by 1 position� If
the motor is already in the boost position, renewed pressing of B will switch off the motor
again� The sequence of motor positions is 1, 2, 3, boost, OFF, 1, 2, ...
The boost speed only remains active for 10 minutes, after which the suction is reduced
to position 3
OFF
Run-on Timer
Whilst the motor is running, activate the run-on timer by prolonged pressing of button B�
The motor will then switch back to position 1 for 10 minutes�
Light
Switch the light ON/OFF by briefly pressing button A. Press and hold down button A
to dim the light� When the light is at its minimum, the light will switch back to maxi-
mum� Consequently, if the user keeps dimming the light, the light will continuously
dim between its minimum and maximum setting�
Touch Control
Position 1 Position 2 Position 3 Boost
ENG
33