Samsung MM-J320 Mode D'emploi page 16

Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
Connect an external USB storage device to the
1.
USB jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the button on the main unit or press
the FUNCTION button on the remote control to
select the MP3/CD function.
• Press the OPEN/CLOSE button to open the
disc tray.
• Insert a CD and press the OPEN/CLOSE
button to close the disc tray.
• Use the CD selection buttons ( [ or ] ) to
select the desired song.
Tuner
• Press the button on the main unit or press
the FUNCTION button on the remote control to
select the FM function.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to
your product.
• Press the button on the main unit or press
the FUNCTION button on the remote control to
select the <AUX> input.
• Play a song from the external device.
3. Press the USB REC button to start recording.
CD
• "TRACK RECORDING" is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3/WMA-CD
• Press the USB REC button. The currently
playing file is copied onto the USB device.
• Press and hold the USB REC button. All the
files in the current folder are copied onto the
USB device.
COPY: "CHECK""START""COPY XX""COPY END"
is displayed. When the recording is done,
"STOP" will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• Tuner: "TUNER RECORDING""RECORD"
• External Source : "AUX
RECORDING""RECORD"
16
English
All manuals and user guides at all-guides.com
4. To stop recording, press the STOP (@) button.
5. To remove the USB device safely, press the STOP
The product automatically creates and saves
recorded files in .MP3 format (SAM-XXXX.MP3).
(@) button once again. After recording, a directory
named "RECORDING(DISCxxxx)"(FULL CD
RECORDING), "RECORDING"(TRACK
RECORDING), "CD COPY"(MP3/WMA-CD),
"TUNER RECORDING" or "AUX RECORDING"
is created on your USB device.
• Do not disconnect the USB or the AC Cord during
recording as this may cause damage to the file.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC, back up the data stored in the
USB, and then format it.
• When the USB memory has insufficient free space,
the system will display "NOT ENOUGH MEMORY".
• The USB device or HDD you are recording to must
be formatted in the FAT file system. The NTFS file
system is not supported.
• When you use the CD high speed search function,
CD recording is not available.
• Sometimes, the recording time may be longer with
some USB devices.
• The REPEAT function is set to "OFF" automatically
and is not available during a recording.
• You cannot record the radio when searching or when
no available station is found in the Tuner mode.
• Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device's
volume level.
• The maximum TUNER/AUX recording time is 5
hours.