Samsung MM-J320 Mode D'emploi page 12

Using Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth technology lets Bluetooth-compliant devices
interconnect easily with each other using a short,
wireless connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body comes into contact with the
receiving/transmitting system of the Bluetooth device
or the product.
- It is subject to electrical variation from obstructions
caused by a wall, corner, or by office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including medical
equipment, Microwave ovens, and wireless LANs.
• Keep the Micro Component System and the
Bluetooth device close together when pairing. The
greater the distance between the system and Bluetooth
device, the worse the quality.
• If the distance exceeds the Bluetooth operational range,
the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Micro Component System has an effective
reception range of up to 16.25 feet (5 meters) in all
directions if there are no obstacles. The connection will
be automatically cut off if the Bluetooth device moves
out of this range. Even within range, the sound quality
may be degraded by obstacles such as walls or doors.
• This wireless device may cause electric interference
during its operation.
To connect the Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth device
supports the Bluetooth-compliant stereo headset
function.
1. Press the FUNCTION button to display the
"BT" message.
• You will see WAIT for a short period of time
and then BT READY on the front display of
the Micro Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user's manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] MICROxxxxxx " from the
searched list.
12
English
All manuals and user guides at all-guides.com
5. You can listen to the music playing on the
• The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
• Only one Bluetooth device can be paired at a
time.
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports
the A2DP (AV) function.
• You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
• You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the Micro Component. If the PIN code
input window appears, enter <0000>.
• Once you have turned off the Micro Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
• The Micro Component System may not search or
connect properly in the following cases:
• Note that such devices as Microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
• When the product is connected to the
Bluetooth device, it will display Device name
; BT on the front display.
• If the Bluetooth device has failed to pair with
the product , delete the previous "[Samsung]
MICRO xxxxxx " found by the Bluetooth
device and have it search for the product
again.
connected Bluetooth device over the Micro
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
- If there is a strong electrical field around the
Micro Component.
- If the Bluetooth device is turned off, not in
place, or malfunctions.