Removing The Swivel Neck Cover; Changing The Electronic Controller; Replacing The Foot Pedal - Kärcher Windsor VersamaticPlus 14 240V Manuel D'instructions

All manuals and user guides at all-guides.com
38
40
41
X
41
0
40
86404590 VERSAMATICPLUS 14 & 18

Removing The Swivel Neck Cover

To remove the swivel neck cover, take out the
retaining screw (38) and slide the cover (40)
downwards then lift out. On re-assembly check that
the wires do not become trapped.

Changing The Electronic Controller

To change the electronic controller (41), disconnect
the lead from the motor. Lift the controller upwards
and then disconnect the lead from the swivel neck.

Replacing the Foot Pedal

Remove the power head from the upper housing.
Remove the cover from the power head. Remove the
retaining screw. Insert a screw driver in the notch on
the axle and slide the axle out. Remove and replace
foot pedal. Re-assemble.
NOTE: Ensure that at re-assembly, the axle (0)
notch (40) is visible as shown
Maintenance
15