Aiphone JK-1MED Manuel D'installation Et D'utilisation page 10

7-7 Automatic night volume adjustment
This automatically lowers the communication volume at the door station
only at night.Initial setting: "Disabled"
1
After performing step 1 in section 7-1, select "COMMUNICATION"
and press MENU button (
2
In the "COMMUNICATION SETTING" screen, press  button or
 button to select "NIGHT VOLUME" and press
( ).
7-8 Restore default setting
All settings can be restored to their condition at the time of purchase.
1. Recorded pictures are erased and settings are reset.
2. Pre-set functions (section 8-7) are not reset.
Settings reset with "RESTORE DEFAULT SETTING"
Setting name
Time JAN/01/2009 00 : 00
Language ENG FRA ITA DUT SPA
Door station chime tone 1
(Tone 1)
Communication time 1 min. 2 min. 3 min. 5 min
Automatic night volume
Enable Disable
adjustment
External
Detection N/O N/C Disable
input
Notification
OFF OFF ON
at door
Sound time 30 sec. Continuous Continuous
Press-to-talk setting Enable Disable
・All saved pictures are erased.
Pictures
・ Zoom x 3, Wide x 3
Recording
・ Wide x 3, Zoom x 3
Screen
・ Zoom x 6
・ Wide x 6
※
are initial views
).
MENU button
Available setting
2 3 4
(Tone 2) (Tone 3) (Tone 4)
3
In the "NIGHT TIME DOOR VOLUME CONTROL" screen, press
 button or  button to select "ENABLE".
4
Press MENU button (
the previous screen.
Press REC button (
previous screen.
NOTES: Distinguishing between day and night is automatically done by the
door station.
1
After performing steps 1 and 2 in section 7-1, select "INITIALIZE"
with  or  and press
2
In the "INITIALIZE" screen, press
(approximately 1 sec.) to initialize. Press
cancel initialization and return to the "MENU" screen.
3
4 LEDs light up during initialization. The screen goes out when
initialization is complete. (The menu LED flashes)
- 10 -
) to complete the settings and return to
) to cancel the setting and return to the
MENU button ( ).
MENU button (
REC button (
)
) to