IKEA TRIXIG Mode D'emploi page 21

LED work light
The screwdriver has a built-in LED work light to illuminate
the work area. The LED work lights up every time the
trigger switch is squeezed and then turns off when the
trigger switch is released.
WARNING: RISK OF TRAPPING
Do not hold the front sleeve of the chuck with one hand at
the same time as you open or close the jaws of the chuck
with the help of the screwdriver/drill's motor.
Maintenance and cleaning
Keep the screwdriver/drill clean and dry at all times to
ensure proper and safe operation. Wipe off any debris
using a soft cloth moistened with water. Do not use any
cleaning agents or solvents.
For safe and proper working, always keep the machine and
ventilation slots clean.
This product is intended for domestic use in the home, not
for commercial or qualified measurements carried out by
professionals.
Keep this manual for future use.
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
21