Publicité
Les langues disponibles
Les langues disponibles
4. Installation
• Remove the packaging and place the induction heater on a non-ferrous, stable and level
surface.
• Check the connection voltage against the rating plate on the unit.
• Each heater is equipped with a plug. C-US plug types are:
120V
(nema 5-15)
Type
EBH 2412
EBH 201
EBH 202
EBH 203
• As there is a wide variety of plug types, the provided plug may not fit. In such cases, obtain
a proper plug. It must be fitted by a qualified electrician. There are different fitting options
depending on the type of cable on the heater:
120V/240V 1 phase heaters
Black
White
Green
• Ensure that the power supply cable cannot come into contact with the workpiece to be
heated. Insert the plug in a grounded socket outlet with connection.
12
120V
(nema 5-20)
(nema 6-15)
120V
(nema 5-15)
X
X
240V
240V
(nema 6-20)
120V
240V
(nema 5-20)
(nema 6-15)
X
Phase
Zero
Ground
240V
(nema 6-20)
X
X
X
X
© Bessey Tools
Publicité
