Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SECURITY
THERMAL SAFETY - OVERHEATING PROTECTION
In the event of overheating, the safety device is automatically activated and the appliance
stops. It restarts automatically after it has cooled down. However, we recommend that you
unplug the appliance and leave it to cool for several minutes. Then restart the appliance as
normal.
ANTI-TIP SAFETY DEVICE
The unit is equipped with an anti-tip safety system, which automatically switches off the unit if
it tips over.
MAINTENANCE
• Let the unit cool completely before handling or cleaning.
• Make sure that the appliance is off and unplug before performing any work.
• Do not immerse the appliance in water or in any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the appliance.
CLEANING THE APPLIANCE: USE A SOFT CLOTH TO REMOVE DUST AT THE AIR INLETS AND OUTLETS.
STORAGE: When not in use, store the product in a dust-free, clean, dry and ventilated place,
away from metal objects if possible. Do not place heavy objects on the unit during storage as
this may damage it.
14
FAQ
Problem
Reason
> The product is not correctly
plug or there is an electrical
problem.
The appliance
does not work
> There is a problem on the
electrical system of your
house.
Drop in the
> The air inlet or outlet is
appliance
obstructed by something.
performance
> Something obstructs the fan.
Abnormal noise
> The product has a
functioning problem.
The unit does not
> The [ FAN ] Mode is on.
produce hot air
The unit
> This is normal: the unit's fan
continues to
shuts off a few seconds
after being switched off to
blow after being
switched off.
cool down more quickly.
The appliance
> Most often, overheating is
overheats
due to dust deposits.
The first time
the appliance
> Don't worry, this means
is used, it emits
that a drop of oil has fallen
smoke or an
on the heating coil during
unpleasant
manufacture.
odour.
Solution
> Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system.
> Leave at least 50cm behind,
around and in front of the
appliance.
> Make sure that no object obstructs
the air flow.
> Contact your reseller for service
support.
> Press the [ + ] button to select
[ WARM HEAT ] Mode or [ HOT HEAT ]
Mode.
> Remove these deposits regularly
by vacuuming the air inlet and
outlet of your appliance.
> If the problem persists, contact
your dealer for after-sales service.
> It will evaporate and this will not
happen again.
15
Publicité
Table des Matières
