Troubleshooting List; Battery-Operated Clipping Machine Econom Cl Sheep Shearing; Charger And Li-Ion Battery - B.Braun Aesculap Econom CL Mode D'emploi

Aesculap

Battery-operated clipping machine Econom CL sheep shearing

8.

Troubleshooting list

8.1 Battery-operated clipping machine Econom CL sheep shearing
Malfunction
The battery-operated clipping
machine does not start
The battery-operated clipping
machine pauses during operation
8.2

Charger and Li-ion battery

Malfunction
Charger not working
10
Econom CL Schafschur
®
Detection
–
The LED of the on/off button 36
blinks twice per second
–
–
–
–
Detection
The "Battery" LED indicator is not
lit up
Li-ion battery not loaded
Cause
Li-ion battery not activated
Li-ion battery not loaded
Li-ion battery defect
Li-ion battery not inserted
Li-ion battery deactivated through
protective circuit
Li-ion battery is empty
Cause
Mains power cord not plugged in
Mains power cord defective
Li-ion battery defect
Remedy
Press button e on the Li-ion bat-
tery
Load Li-ion battery
Insert new Li-ion battery
Insert the Li-ion battery
Switch the battery-operated clip-
ping machine off and on again
Insert new Li-ion battery
Remedy
Plug mains power cord into the
device socket on the charger and
into the socket of the mains power
supply
Replace mains power cord
Send Li-ion battery to manufac-
turer for repair, see Technical Ser-
vice