Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
APP STORE
GOOGLE PLAY
MAINTENANCE
Safe and efficient use can only be achieved if the appliance is
properly installed and maintained. It is your responsibility to ensure
that the appliance is maintained regularly. Parts that have been
used and/or damaged must be replaced before the appliance is
used again. The appliance should only be used and stored indoors.
Long-term exposure to weather and temperature/humidity changes
can have a serious impact on the electrical components and moving
parts of the unit. Always unplug the power cord from the unit before
cleaning or servicing it.
Daily maintenance
•
Clean and remove sweat and moisture after each use.
•
Check that the unit is free of dust and dirt.
•
Do not use aggressive cleaning agents and keep the device
away from moisture.
Semi-annual maintenance
•
Clean and remove sweat and moisture after each use.
•
Check that the unit is free of dust and dirt.
•
Do not use aggressive cleaning agents and keep the device
away from moisture.
CAUTION!
All repairs must be performed by a professional technician,
•
unless otherwise specified by the supplier or manufacturer.
Cleaning
General cleaning of the machine will prolong its life. Keep the machine
clean by dusting it regularly. Regular maintenance extends the life of
your machine and prevents accidents! For more information, please
visit https://www.virtufit.nl/service/faq/
CAUTION!
Wear clean shoes to reduce the risk of soiling the
machine.
Battery
AAA BATTERIES
The display uses AAA batteries, which are replaceable on the back of
MANUAL
the display. The batteries must be inserted correctly.
If the screen is unreadable or only parts of the image work, proceed
as follows:
•
Remove the batteries and wait 15 seconds.
•
Replace the batteries correctly.
Tips on using the battery
•
Remove the batteries from the screen when they are empty or
when the camera will not be used for a long period of time.
•
Do not recharge, disassemble or dispose of batteries in fire.
•
Pay close attention to the + and - when inserting the batteries.
When replacing batteries, it is recommended to replace all
batteries, do not mix old and new batteries.
•
It is recommended to use alkaline batteries, they have a longer
life than normal batteries.
•
Batteries should be replaced when the display loses brightness
or stops showing.
Battery replacement
•
If the display is not accurate, it is recommended to replace the
batteries.
•
Use 2 x AAA batteries for power.
CONSOLE (FIG. A)
•
MODE Confirming setting and/or changing display
•
SET Setting TIME, COUNT, CAL.
•
RESET Press and hold for 3 seconds to reset settings.
Functions
SCAN Press "MODE" until "SCAN" is displayed. The console will
•
alternate between the 7 functions: TIME, DISTANCE, CALORIE,
COUNT, TOTAL COUNT, RPM, PULSE. Each functions will be hold
for 6 seconds.
•
TIME The total training time from the beginning to the end of
training will be displayed. Press "MODE" until "TIME" appears to
set a training time.
•
RPM Number of strokes per minute, indicating the stroke speed
11
Publicité
