Télécharger Imprimer la page

virtufit Water Resistance Aqua 100i Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
hand water pump (76) to fill the water tank.
Funnel (77): Insert the funnel (77) into the opening of the water
tank and pour a bucket full of water through the funnel into the
water tank.
Look at the side of the water tank to see what the water level
is in the tank.
Replace the water tank closing cap (33) on the opening of the
water tank (12), so that it is properly closed.
NOTE!
You can read the water level on the side of the tank (FIG. A).
Fill to maximum level 6. The warranty will be voided if the
water tank is filled above level 6.
The resistance depends on the water level in the tank. Level
1 is the lowest resistance and level 6 is the highest resistance.
Emptying the water tank (2)
Remove the water tank cap (33) from the top water tank (12)
opening.
Place an empty bucket next to the water tank and insert the
end of the manual water pump hose (76) into the empty bucket.
Insert the other end of the hose into the opening of the water
tank (12). Squeeze the hand water pump (76) to empty the water
tank.
When the water tank is empty, dry it with a cloth.
Replace the water tank closing cap (33) on the opening of the
water tank (12), so that it is properly closed.
TRAINING WITH HEART RATE
Wireless heart rate receiver (5 kHz and Bluetooth)
This VirtuFit fitness equipment is equipped with a wireless heart rate
receiver. For the heart rate measurement with a wireless heart rate
monitor, use a heart rate monitor that works on Bluetooth and / or a
5 kHz frequency. With a wireless heart rate monitor, it is important
that the electrodes are slightly moist and the heart rate monitor fits
well on your body. Refer to your heart rate monitor's user manual for
proper instructions. Incorrect use of the heart rate monitor may result
in abnormal readings.
NOTE!
A wireless heart rate monitor is not included as standard.
Contact your dealer to purchase a wireless heart rate monitor.
WARNING!
If you have a pacemaker, it is recommended that you consult
your physician before using a wireless heart rate monitor.
In rooms with multiple heart rate monitors, it is recommended
that you keep enough distance to avoid interference between
different devices.
Always try to keep the wireless heart rate monitor within a
range of 1 meter from the console for optimal reception.
Always wear a wireless heart rate monitor directly on the
body, under clothing.
TRAINING WITH FITNESS APPLICATIONS
VirtuFit does not provide service for third party fitness applications
such as Kinomap, iConsole, FitShow etc. If you encounter problems
with a third party fitness application, please contact the developer
of the application in question.
Instruction
To scan the QR code with an Android or IOS phone or tablet, a
QR code scanner is required. The app for scanning QR codes can
be downloaded from the App Store or Google Play Store.
Scan one of the QR codes below to go directly to the App Store or
Google Play Store page where the fitness app can be
downloaded.
Scan the QR code on the right to access the fitness app
manual. The manual describes step by step how to connect the
fitness app to the device, how the fitness app works and what its
capabilities are.
Fitshow
APP STORE
GOOGLE PLAY
Kinomap
MANUAL
10

Publicité

loading

Ce manuel est également adapté pour:

Vfwrowa100i