ACERBIS CARLINO KID Mode D'emploi page 16

EN
Now try doing what we call the "ROLL OFF TEST"
Fasten the helmet and with one hand hold the chin strap and with the other hand try
to remove the helmet with force from the back. If the helmet can be easily removed,
the size is wrong or it is not worn and fastened properly.
REPEAT THE INSTRUCTIONS until you find a helmet that fits perfectly and securely
on your head and is fastened correctly.
The main function of a helmet is to protect the head in the event of a collision.
This is achieved thanks to the absorption capacity of the di erent materials used,
therefore it is very important to carefully follow the instructions below:
WARNING
To reduce the risk of severe injuries or death and avoid damaging your helmet:
• The helmet is designed specifically for motorcycle use and should not be used
for any other purpose because it will not guarantee its protective capacity.
• Before use, remove the protection applied to the face shield or sun visor.
• Never adjust accessories while riding, Only adjust your helmet while stationary.
• Do not drop the helmet even if accidentally because it can damage and reduce
the shock absorption capacity of the materials: the damage may not be visible.
• Handle the helmet with care to avoid compromising its structure. If in doubt
about the integrity of the helmet, contact an authorized ACERBIS dealer.
• Only fit original and customized accessories for your helmet.
• Do not wear anything between your head and the helmet as this will reduce its
e ectiveness.
15
2.0 HELMET USE