Starting Operation; Switching Off The Engine; Stopping Operation - Al-Ko Snow Line 560 Ii Mode D'emploi

Snow Line 560 II, 620 II, 620E II
230 V Starting procedure (620E II)
1. 2.

Switching off the engine

1. Set the throttle to Slow
In order to prevent freezing, continue running
free of snow.
2.
» The engine switches off.
3. Turn the fuel tap to the Closed position (
Danger: risk of severe injury!
469186_c
All manuals and user guides at all-guides.com
( 34).
35-1).
35).
Operation
Danger - risk of injury!
Wear work clothing and protective gear.
Winter clothing
Non-slip winter shoes
Eye protection (safety glasses or visor)
Hearing protection

Starting operation

1. Prepare the snow blower for operation.
2. Check the position of the snow discharge chute and
adjust the discharge direction using the hand
crank ( 36-1).
adjust the discharge height (
3. Start the engine.
4. Set the wheel drive speed (
the slowest speed and 5 the fastest speed.
The reverse speeds are R1 and R2, R1 being
the slower speed and R2 the faster speed.
5. Press the auger drive clutch lever (
Danger: risk of severe injury!
6. Press the wheel drive clutch lever (
» The snow blower starts moving.

Stopping operation

1. Release (disengage) the auger and wheel drive
clutch levers ( 38-1).
In order to prevent freezing, continue running
free of snow.
» The snow blower stops moving and the auger
and impeller stop running.
GB
36-2).
36-3):
37).
37).
29