Télécharger Imprimer la page

AEG HK884406FG Notice D'utilisation page 10

Publicité

Les langues disponibles

Les langues disponibles

10
www.aeg.com
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
As the zone gets more hot, the colour of
the ring changes.
To deactivate the function: change the
heat setting.
4.8 Timer
There are 3 functions: Automatic
Counter, Power-off timer and Minute
Minder.
Automatic Counter
You can use this function to monitor how
long the cooking zone operates. The
function starts automatically and comes
on below heat setting in the cooking
zone on the display.
To reset the function: touch
the Automatic Counter
cooking zone from the list with arrows
and touch
Power-off timer
You can use this function to set how long
the cooking zone operates for only this
one time.
To activate the function: touch
times to get the Power-off timer
Then set the cooking zone from the list
with arrows and touch
the time with arrows and touch
confirm. When the time comes to an
end, the sound operates and the
cooking zone deactivates.
To stop the sound: touch
Minute Minder
To activate the function: touch
times to get the Minute Minder
the time with arrows. The function
. P in the ring comes on.
to get
. Then set the
to confirm.
to confirm. Set
.
. Set
indicator comes on. When the time
comes to an end, the sound operates.
To stop the sound: touch
The function has no effect on
the operation of the cooking
zones.
4.9 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.10 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on. The Timer stays on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the hob,
you also deactivate this
function.
two
.
4.11 The Child Safety Device
This function prevents an accidental
operation of the hob.
to
To activate the function: touch
seconds when all zones are off or when
the hob is shutting down. The display
shows a message, that the function
operates. Deactivate the hob with
To deactivate the function: activate the
three
hob with
.
. Touch
and then
.
.
.
.
for 4
.
.

Publicité

loading