Gewiss Chorus GW 10 766 Mode D'emploi page 27

PROGRAMMING WITH THE EASY BASE UNIT
All manuals and user guides at all-guides.com
After creating the required function the actuator's operating parameters can be set from
the "Application → Parameters" menu.
The parameters available, in relation to the function created, are listed in the following
table.
The underlined value is the default value.
Function: timer mode
Parameter: activation time
not active
1 second
2 seconds
3 seconds
5 seconds
10 seconds
15 seconds
20 seconds
30 seconds
45 seconds
1 minute
1.25 minutes
1.5 minutes
2 minutes
2.5 minutes
3 minutes
5 minutes
15 minutes
20 minutes
30 minutes
1 hour
2 hours
3 hours
5 hours
12 hours
24 hours
Configuration parameters (Easy)
no timing
relay activated for 1 second
relay activated for 2 seconds
relay activated for 3 seconds
relay activated for 5 seconds
relay activated for 10 seconds
relay activated for 15 seconds
relay activated for 20 seconds
relay activated for 30 seconds
relay activated for 45 seconds
relay activated for 1 minute
relay activated for 75 seconds
relay activated for 1.5 minutes
relay activated for 2 minutes
relay activated for 2.5 minutes
relay activated for 3 minutes
relay activated for 5 minutes
relay activated for 15 minutes
relay activated for 20 minutes
relay activated for 30 minutes
relay activated for 1 hour
relay activated for 2 hours
relay activated for 3 hours
relay activated for 5 hours
relay activated for 12 hours
relay activated for 24 hours
22