Vax X5 Manuel Du Propriétaire page 9

VACUUMING WITH ACCESSORIES
NOTE: The two accessory parts may be used on the suction hose and cleaning wand.
NOTE: For safety reasons when vacuuming stairs, leave the upright vacuum cleaner on the bottom stair.
• Bring the upright vacuum cleaner into its vertical locking position. The brushroll switches off automatically in this position, thus preventing any damage to the
carpet while cleaning with hose or tools.
• To switch the upright vacuum cleaner on again when you resume vacuuming, tilt it back. The brushroll switches on again automatically.
1.
Press the release button to release the
cleaning wand.The cleaning wand with built-
in brush can be used for cleaning surfaces.
4.
CREVICE
TOOL
UPHOLSTERY
TOOL
To access tools, rock upholstery tool
away from cleaner. To remove tools,
grasp tool and pull up and out of
accessory clip.
8
All manuals and user guides at all-guides.com
2.
While pressing the hose release
button, pull out the suction hose
to release from cleaning wand.
5.
Then attach the accessory to the
suction hose.
3.
FASTENING
RING
Straighten the hose and hook the hose clip
into the fastening ring to prevent the upright
vacuum cleaner from toppling over during use.
6.
6a.
The rotating upholstery tool may be turned through 360˚ to allow
vacuuming in poorly accessible areas such as corners, edges, stairs
and vertical surfaces.
HOSE
CLIP