Publicité
Les langues disponibles
Les langues disponibles
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY, UNPLUG CLEANER BEFORE SERVICING.
PROBLEM
POSSIBLE CAUSE
1. Power cord not firmly plugged into outlet.
Cleaner won't run
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
1. Dirt container not installed correctly.
Cleaner won't pick up
2. Dirt container full.
or low suction
3. Brushroll not on.
4. Dirty/clogged filter.
5. Dirt passage clogged.
6. Cleaning wand not installed correctly or misaligned.
1. Dirt container full.
Dust escaping from
2. Dirt container not installed correctly.
cleaner
3. Cleaning wand not installed correctly or misaligned.
4. Filter not installed completely.
1. Dirt passage clogged.
Cleaner tools won't
2. Dirt container full.
pick up
3. Filter clogged.
4. Dirt container not installed correctly.
1. Bulb burnt out.
Headlight not working
2. Loose electrical wires.
1. Dirt container lid not aligned properly.
Dirt container won't
2. Alignment tab not aligned.
lock into place
1. Brushes clogged.
Brushroll not rotating
2. Brushroll switch in OFF position.
3. Brushroll needs to be reset.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE 1-877-VAX-USA-9 (1-877-829-8729)
In the event that further assistance is required, see your Yellow Pages for an authorized VAX
owner. The service parts used in this unit are easily replaced and readily available from an authorized VAX
manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
All manuals and user guides at all-guides.com
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace fuse/reset breaker.
3. Take to service center or call 1- 877-VAX-USA-9 (1-877-829-8729).
4. Allow cleaner to cool - Pg. 4.
1. Review dirt container removal & replacement - Pg. 11& 13.
2. Empty dirt container - Pg. 11.
3. Turn on brushroll - Pg. 7.
4. Remove HEPA filter and clean - Pg. 11-13.
5. Remove dirt container and cleaning wand then check hose inlets for obstructions - Pg. 11.
6. Review cleaning wand installation - Pg. 6.
1. Empty dirt container - Pg.11.
2. Review dirt container removal & replacement - Pg. 11& 13.
3. Review cleaning wand installation - Pg. 6.
4. Review filter removal & replacement - Pg. 11.
1. Remove dirt container and cleaning wand then check hose inlets for obstructions - Pg. 11.
2. Empty dirt container - Pg. 11.
3. Clean filter - Pg. 12 & 13.
4. Review dirt container removal & replacement - Pg. 11& 13.
1. Replace bulb - Pg. 14.
2. Call 1- 877-VAX-USA-9 (1-877-829-8729) for nearest authorized VAX
1. Remove and realign lid - Pg. 12.
2. Realign tab - Pg. 13.
1. Unplug unit. Remove debris from brushroll.
2. Slide brushroll ON/OFF switch to the ON position to activate brushes.
3. Press brushroll reset button - Pg. 7.
Dealer. Costs of any transportation to and from any place of repair are to be paid by the
®
Dealer or retailer. Always identify your cleaner by the model number and
®
Dealer.
®
15
Publicité
