Welch Allyn Digital MacroView Mode D'emploi page 14

All manuals and user guides at all-guides.com
8 Operation
Setup
Prior to using the Digital MacroView for the first time, install the
Welch Allyn Viewer Utility following the instructions provided
with the Viewer CD.
Using the Digital MacroView System
1. Verify the power source is off and attach the Welch Allyn
Digital MacroView head to the power source
2. Connect the USB cable to the port on the back of the Digital
MacroView head and to the computer USB port. The
computer gives an audible signal that the connection is
complete.
3. Double-click the Welch Allyn Viewer icon on your computer
desktop.
Welch Allyn
(see page 7).
USB Port