Grape WSR-1000 Mode D'emploi page 4

Operation
A. Notes on the installation
1. Make sure your input AC voltage conforms to the adaptor specifications.
2. Only use the power adaptor provided with the WSR-1000. If you use another power supply,
make sure the power output is 5V DC, 1A centre positive.
3. The maximum range of the WSR-100 is approximately 30 meter with direct line-of-sight
between the Transmitter and Receiver. Obstacles and/or walls between transmitter and
receiver may shorten the range.
4. To ensure good infrared remote control operation aim your remote control at the IR receiver
of the WSR-1000 and press the buttons firmly. (Some remote controls may require that you
press and hold each button for about a second). The working angle of the IR receiver is +/-
15 degrees.
5. The remote control has to be operated within 0.3 to 5 meters distance from remote control to
IR receiver.
B. Transmitter and Receiver Pairing MODE
1. Press the MODE key on the Receiver.
2. You will see the message "Connecting through Pairing" on screen.
3. Then press the MODE key for a second on the Transmitter.
4. The Receiver and Transmitter will now auto connect.
C. IR Extending function
1. Make sure the IR emitter is installed properly in the Transmitter.
2. Make sure the IR receiver is installed properly in the Receiver.
3. Use the remote control from source device to control the source form the Receiver.
Note: Please do not cover either Transmitter or Receiver with any object. Objects could block
the air circulation and interfere with functionality.
All manuals and user guides at all-guides.com
4