Hoover HF9 Guide D'utilisation page 7

6. USING YOUR CLEANER
There are 3 different working modes for your cleaner:
1. Stick mode.
2. Above Floor mode.
3. Handheld mode.
1
6.1 STICK MODE
To use your product in Stick mode:
1. Place your foot on the nozzle and pull back
to recline the tube.
2. Press the On/Off power button to begin
cleaning.
NOTE: The nozzle LED lights are always on and
the brushbar is always rotating.
Controls settings:
Press the MODE button to select your desired
floor surface, the LED display icon of HARD
FLOOR or CARPET will illuminate to confirm
your setting.
If you require a deeper clean when using your
product in Stick mode, press the turbo button
to increase the power.
The turbo icon will illuminate on the LED
display to confirm your selection.
Please note this will reduce your battery
runtime.
To return to standard mode, press the turbo
button, the icon on the display will turn off.
2
1
TURBO TURBO
MODE MODE
7
3
2
GB