Publicité
Les langues disponibles
Les langues disponibles
Slip Fitter Mounting (Compatible with 2 1/8 – 2 3/8 Tenon):
1.
Turn the power off
4.
Make the wiring connections
according to the wiring diagram on
Page 7. Seat the slip fitter on the
tenon and secure with the four (4)
set screws.
4106888
2.
Review the universal mount
assembly shown. Remove the
square and round pole adaptors
and their gaskets.
5.
Restore power and check that the
fixture is working properly. Correct
the angle of the fixture if needed
by repeating Step 2, (turn off
power before making
adjustments).
3.
Remove the slip fitter cover and
loosen the revealed center bolt to
adjust the angle of the slip fitter.
Publicité
