Kohler K-528 Instructions D'installation page 7

Outlet
Power
Cord
Outlets
Supply Inlets
2. Plan the Component Locations
NOTICE: If the digital valve will be used for a bath/shower application, the bath fill supply line must be
routed from the #1 outlet port.
NOTE: Only one interface is required, located inside the showering enclosure. A second interface can be
installed outside the showering enclosure. The interfaces are identical and either can be used for the
primary and secondary connection.
Determine the locations of all required components before beginning installation.
When routing piping, the numbers marked at each valve outlet must correspond to the appropriate
showering component for pre-programmed or custom showering experiences to function properly.
Kohler Co.
All manuals and user guides at all-guides.com
Interface
Drip
Loop
7
NOTE: Only one interface, installed
inside the shower, is required.
20' (6.1 m) Cables
Interface
Coupler
Drip Loop
1145587-2-B