Ricatech RR3100 Mode D'emploi page 11

Retro classic jukebox
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TURNTABLE
PREPARING TO USE THE TURNTABLE
1. Remove black tie-wrap by untwisting and gently sliding out from TONE ARM .
2. Remove white protective needle cover by gently pulling towards front of unit.
3. Release TONE ARM and hold-down clip by gently pushing to the right. This will unlock tone arm from its ARM REST.
Re-lock the hold-down clip when moving the unit to another location.
TURNTABLE OPERATION
1. Press the FUNCTION /
2. Set the SPEED CONTROL SWITCH to the correct speed (33 1/3, 45 or 78 rpm) for the selected record.
3. Pull the TONE ARM slightly to the right side until hear the "click" sound to activate the turntable.
4. Move the tone arm over the record and lower it to the point you want the record to start.
5. At the end of the record, the TONE ARM will stop automatically. You must return it to the TONE ARM REST by hand.
ACCESSORY SUPPLIED: Adaptor for 45 rpm records
To play a 45 rpm record, remove the adaptor by placing thumb & forefinger in recesses
and pulling it upwards. Then placing it on the SPINDLE. The record can then be placed on the turntable.
EARPHONE JACK OPERATION
Listening through Earphones / Headphones (not included)
CD PLAYER
Playing a CD
1. Press the FUNCTION /
2. Press CD OPEN / CLOSE /
3. Insert a disc with the printed side facing up. Press CD OPEN / CLOSE /
is displayed as the CD player scans the contents of a disc.
4. Track no. 1 will be playback automatically after finish the reading CD disc contents.
5. Press FF /
or FB /
6. Press STOP /
to stop playback.
CD-MP3 disc playback
1. Insert CD-MP3 format disc. Press CD OPEN / CLOSE /
CD player scans the contents of a disc.
2. Track no. 1 of root folder (Folder 1) will be playback automatically after finish reading CD-MP3 disc contents.
3. Press FF /
or FB /
4. Press PRESET + /
to set the unit to PHONO mode.
to set the unit to CD mode.
to open the CD compartment
once or repeatedly until the desired track number appears in display.
once or repeatedly until the desired track number appears in display.
or PRESET – /
to select desired album.
(if required)
. again to close the compartment, READ
again to close the compartment. READ is displayed as the

Publicité

Table des Matières
loading

Table des Matières