DeLOCK 66453 Mode D'emploi page 3

English
Driver Installation
1.
Switch on your computer.
2. Connect the adapter to an available USB port of your computer.
3. The driver will be installed automatically. If this is not the case, please
perform the driver installation as follows:
4.
Put the driver CD in the CD ROM drive.
5.
Open device manager, then right click on the error port and click "Update
Driver".
6. Choose "Search for drivers on the computer (extended)".
7. Navigate to the appropriate folder of your operating system.
8. Tick "Include subfolders". Afterwards click on "Next".
9.
Click on "Install".
10. The driver will now be installed.
11. Click on "Close".
12. You can now start to use the device.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 05/2023
-3-