HOMCOM 713-037 Instructions De Montage page 6

Assembly Instructions:
1) Position the Arms so
that they fits into the
seat,you will hear a
"click" when they are
in place.
2) Position the Back(refer to
point 1） Connect the Lift and
Recliner supply cable pins.Fit
the pins properly in the
manner shown in the image.
Do not force them,they
only have one correct
position.
The pins must be connected
3)
correctly.If the lift chair starts
working when turn on but can't
stop,probably cause the pins have
been connected incorrectly
should happen,turn the power
off and reconnect the pins.
.If that