Makita BUB142 Manuel D'instructions page 4

(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
11. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
12. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
16. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
18. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
19. Disconnect the plug from the power source and/or
the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
20. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
21. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
4
All manuals and user guides at all-guides.com
22. Keep cutting tools sharp and clean. Properly
23. Use the power tool, accessories and tool bits etc.
Battery tool use and care
24. Recharge only with the charger specified by the
25. Use power tools only with specifically designated
26. When battery pack is not in use, keep it away from
27. Under abusive conditions, liquid may be ejected
Service
28. Have your power tool serviced by a qualified
29. Follow instruction for lubricating and changing
30. Keep handles dry, clean and free from oil and
CORDLESS BLOWER SAFETY
WARNINGS
1. Always use protective goggles, a cap and mask
2. Never point the nozzle at anyone in the vicinity
3. Always use the dust bag when collecting dust,
4. Do not collect still smoldering cigarette ashes,
5. Never block suction inlet and/or blower outlet.
6. The blower is not intended for use by young
repaired before use. Many accidents are caused by
poorly maintained power tools.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
battery packs. Use of any other battery packs may
create a risk of injury and fire.
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.
accessories.
grease.
when using the blower.
when using the blower.
chips and the like.
freshly cut metals shavings, screws, nails and the
like. Warning - Electric shock could occur if used
on wet surfaces. Do not expose to rain. Store
indoors.
Increased motor revolution may cause dangerous
fan breakage.
children or infirm persons without supervision.
GEB076-1