LGB 51099 Mode D'emploi page 8

Safety Notes
Make sure you read the following safety notes before using
this controller for the first time:
• This locomotive controller is designed for use only in
dry areas.
• This locomotive controller is not a toy. It is used to
operate a model railroad layout.
• Two or more locomotive controllers may not be con-
nected with each other electrically.
• A built-in overload protection circuit protects each
locomotive controller from damage in the case of an
overload or a short circuit. A locomotive running on
the track layout will come to a stop when the overload
protection circuit is activated. The locomotive control-
ler comes back on automatically after the overload or
short circuit has been corrected.
Important Notes
• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized LGB dealer for repairs.
• The warranty card included with this product specifies
the warranty conditions.
• Incorrect hookup of this locomotive controller will
damage it.
• Disposing: www.maerklin.com/en/imprint.html
8
All manuals and user guides at all-guides.com

INPUT
2 1 max. 25V DC
0 - 16V DC max.
51090
INPUT
2 1
max. 25V DC
0 - 16V DC max.
51090