Publicité
All manuals and user guides at all-guides.com
Common issues and solutions:
Common issues
No power, LED off,cannot
power on
LED on, cannot power on
Cannot screen mirror
Cannot stream media
Unable to recharge smart
phone when projector is
unplugged from power
Remote not responsive
Cannot shutdown
projector
Auto V Keystone not
working
Troubleshooting
Solutions
Check the power adapter for loose connection.
Check the power adapter for loose connection, press the Power
button to turn on projector.
1. Check the Quick Start Guide for the correct screen mirroring
function.
2. Shorten the distance between smart device and projector for best
screen mirroring quality.
3. Make sure the smart phone is connected to the correct Wi-Fi
network SSID.
Check the internet connection for your smart device.
Did not short press Power before connecting smart phone.
1. Replace remote batteries
2. Pair the remote with your projector again. Pairing procedure:
simultaneously hold down Volume+ and Volume- keys for 3 seconds,
once the remote's flashing red light becomes constant, the pairing
process is complete, and you can begin using the remote normally.
Press and hold the Power button for 10 seconds to shutdown.
1.Select "Setting>Advanced Setting" and confirm "Auto V Keystone" is
On.
2.If after step 1, the images are still not rectangular, then follow the
steps below to calibrate the projector:
Place the projector on a level surface, select "Setting>Advanced
Setting" and turn Off "Auto V Keystone".
Then turn On "Keystone Calibration", and wait until "Keystone
Calibration" turns itself Off after calibration.
Finally turn On "Auto V Keystone" to confirm the feature is functional.
Publicité
