GE GWS04 Manuel Du Propriétaire Et Instructions D'installation page 11

GVS04 Models Only
DOOR HANDLE
The door handle and screws
are shipped in a hardware
bag attached to one of the
shelves inside the cabinet.
two screws. Secure the door
handle to the side of the
door as shown.
REVERSING THE DOOR
2. Tape the door shut with masking tape to secure
alignment.
3. Remove the top hinge cover by removing the screw.
4. Remove the 2 screws securing the top hinge to the
frame.
bottom hinge.
6. Remove the 2 screws securing the bottom hinge
assembly to the frame.
NOTE:
to let it stand upright for at least 2 hours before
possibility of a malfunction in the cooling system.
Hinge
cover
Plug
Button
49-60734-2
All manuals and user guides at all-guides.com
Installation Instructions
Screw
Handle
Screw
Top
Hinge
Bottom
Hinge
DOOR LOCK
To secure the door lock,
push the key in and
To unlock, push the
door.
right side. Press firmly to secure.
section for instructions.
bottom hinge on the opposite side.
side. Make sure the door is aligned with the cabinet
before tightening the screws.
12. Remove the tape. Open and close the door to check
screws on the bottom hinge, realign the door, and
retighten the screws.
13. Plug in the beverage and wine center.
NOTE:
sure to let it stand upright for at least 2 hours before
the possibility of a malfunction in the cooling system.
14. Set the temperature controls to the desired setting.
Bottom
Hinge
11