Publicité
Les langues disponibles
Les langues disponibles
1
110 V
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
> Check the brackets are
leveled and securely
attached to the wall.
9
> Slide the unit toward the
wall.
2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
Ø ⅜"
2x S8
> The plastic anchors
provided are for concrete
wall applications.
10
> Slide the unit completely
down.
3
2x S8
> The plastic anchors
provided are for concrete
wall applications.
7
2x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
11
Installation is completed.
4
2x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
8
> Plug the unit into outlet
and lift the unit up
and onto the mounting
brackets.
MAL_DuraStyle_DS7471/19.04.2
6
Publicité
