Description Of The Components; Brief Description Of The Important Features Of The Unit - GF iLITE MAPAX2LJRG Instructions D'utilisation

Instruction manual
MAPAX2LJRG Battery tool
2. Description of the battery operated electro-hydraulic sliding tool

2.1 Description of the components

The hydraulic tool is a hand guided tool and consists of the following components:
Table 11 (see page 2, picture 1)
Pos. Description
1 Sliding head
2 Housing
3 Retract slide
4 LED (red)
5 Battery lock
6 Battery (RAL1/BL1815)
7 LED (white)
8 Trigger

2.2 Brief description of the important features of the unit

Hydraulic Pressure Check, HPC for short, monitors the oil pressure in the tool's oil circuit, hence ensuring a contin-
uous, consistent press quality.
The tool incorporates a catcher and knurled screws to fix the sliding forks.
The unit is equipped with a special brake which instantly stops the forward motion of the piston/dies when the trigger
is released.
Function
Working unit for the reception of the sliding forks and expanding adapter
Ergonomically designed 2K-housing
Bar to open the sliding forks in case of an error or emergency
Indicator for battery charge, service Intervals and faults
Slide to unlock the battery
Rechargeable Li-Ion battery 18V
To illuminate the working area
Actuator to start the sliding cycle
44