Installation (continued)
Mounting the Headphone Bracket
Three options are provided for mounting the bracket (self-tapping screws, machine screws with nuts or
double-sided tape) to ensure a mounting option ideal for your mounting location. Alternately, the
headphone can be mounted directly to the instrument panel if access to the rear of the instrument
panel is available.
Note: Mounting holes should be drilled to 7/32". Before drilling the mounting holes, make sure
the area behind the panel where the holes are desired is clear of wires and fuel, vacuum and or
brake lines.
Self-Tapping
Screws
(Hole size 7/32")
Machine Screws
with Nuts
(Hole size 7/32")
Mounting Stack
Mounting machine screw
Bracket metal
Vehicle mounting surface
Washer
Nut
6
JHD910
Double-Sided
Tape