DeLOCK 11499 Mode D'emploi page 4

English
Safety instructions
• This power socket is only suitable for indoor use (IP20).
• Use this power socket only in dry locations.
• The mounting and installation of electrical equipment is only
allowed to be carried out by a qualified electrician.
• This power socket provides a side grounding contact and
increased contact protection according to VDE0620. The
maximum allowed rated current is 16 A / 250 V~.
Installation
1.
Connect the supply line to the spring clip according to the
connection diagram (Electric Wiring Diagram).
2. Put the module (b) into the installation box (e) and screw them.
If your installation box does not offer any possibility for screw
connection, use the clamps (a) on the right and left of the
module (b) to clamp the module.
3. Put the cover (c) onto the module (b) and insert the socket
cover (d) through the cover (c) onto the module (b).
4.
Screw the cover (d) to the module (b).
Support Delock
If you have further questions, please contact our customer support
support@delock.de
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 03/2023
-4-