GoPro Dual HERO System Mode D'emploi page 9

/ Using the Dual HERO System
TO BEGIN RECORDING
1. Power ON Dual HERO System by pressing
2. Select desired recording mode by pressing
VIDEO
PHOTO
BURST PHOTO
(Not synced for 3D capture)
3. Press to start recording.
+ PRO TIPS
• The camera's LCD screens and red LED lights
may not blink in sync. This is not a problem
and has no effect on whether the cameras are
properly synced with one another.
All manuals and user guides at all-guides.com
. Both cameras will power ON.
and choosing one of the following options:
TIME LAPSE
DUAL (Video/Time Lapse mode, where the primary camera
captures video and the secondary camera captures photos
at timed intervals of 2, 5, 10, 30 or 60 seconds)
• Should the battery die or microSD card become
full on either camera, both cameras will save
the files and stop recording.
9