GoPro Dual HERO System Mode D'emploi page 8

All manuals and user guides at all-guides.com
/ Removing Sync Cable from Cameras
To remove the Sync Cable, grasp Side and remove it from the secondary camera's HERO Port, then
grasp Side and remove it from the primary camera's HERO Port, unhooking from primary camera's
right side groove. Do NOT pull the cable connecting Sides and as this may damage the Sync Cable.
WARNING: Do not connect or disconnect the cameras from the Sync Cable while the cameras are
recording. Doing so may result in damage to the cameras and/or Dual HERO System.
8