Télécharger Imprimer la page

Keyton SensorScan Manuel D'utilisation page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
27
Do not stretch the back muscles for more than 15 minutes at one time. Use only at gentle setting on first using the
chair, and do not use for more than 5 minutes. You can gradually increase duration and intensity as you get used to
the massage chair.
28
Do not massage any one point for longer than 2 minutes.
29
If when you first use the chair you feel the massage on your back is too strong, you can use a towel, a blanket or a
small pillow to soften it.
30
Do not try to modify the chair by adding any device.
31
Never drop or insert any object into any operating part.
32
Due to the structure of the massage chair, you may hear some noise coming from it during operation.
33
Before reclining the backrest or the footrest make sure that there is nobody near the backrest or footrest.
34
Do not use the chair if its upholstery is damaged.
35
Never put any part of the body between the massage heads. The squeezing action of the heads may injure it. Never
put any part of the body between the footrest recliner and the armrest, or between the armrest and the backrest.
36
When the backrest is in a reclined position, do not sit on it or sit with your legs resting on the headrest. Do not sit on
the footrest, the chair may fall over.
37
This chair is suitable only for normal household use.
38
Do not sit on the controller, or drop it.
39
Please remove the batteries from the remote control when not in use for a long period of time.Batteries may leak
corrosive liquids, thus irreparably damaging parts of the remote control.
40
Leakage, heating or explosion of the batteries may cause fire or personal injury. It is recommended to use the right
batteries for the remote control.Please do not short-circuit, do not expose the batteries to heat and do not place them
in fire. Please do not reverse the polarity of the batteries.
41
Do not treat the covering roughly: exposure to direct sunlight can cause fading or a color change of the covering.
42
Do not attempt to repair the massage chair yourself.
43
To prevent excessive massaging, the massage chair comes with automatic 15-minute programmes. After that time,
the massage heads will return to their initial position and stop.
44
The remote control should be supervised by the user once seated in the chair, and should never be utilised by anyone
not seated in it.
45
In case there are two or more chairs with remote control, you must never perform simultaneously the process of
ACTIVATING A NEW REMOTE CONTROL. You must finish the process with one chair and then start with the next
one. Otherwise the remote control could activate more than one chair.
46
Leather care and maintenance: To preserve, clean and nourish the leather, it should be treated with a specific leather
product. DO NOT USE TRADITIONAL HOME CLEANING PRODUCTS. We recommend the use of KEYTON
cleaning product.
47
Microfiber care and maintenance: To clean microfiber and ensure it's always in excellent condition you must use a
water-based product, dry-cleaning solvents (pure, without water) or two tablespoons of ammonia mixed with a litre
of water. KEYTON also manufactures a special cleaning product for this type of microfiber.
48
For the best comfort do not forget to put your 'Comfort Kit' on the backrest when the massage programmes finish.
Comfort Kit
6
All manuals and user guides at all-guides.com
Relax Use
Massage Use

Publicité

loading

Produits Connexes pour Keyton SensorScan