Publicité
Les langues disponibles
Les langues disponibles
Before first Use
Remove the worklight out of the packaging. Keep packaging materi-
als out of reach of children. There is risk of suffocation!
Charging the Battery
Before first use, charge the battery of the worklight.
1. Connect the USB charger cable
to the PC USB port output or to
an external charger and the
charging socket of the work-
light. The USB port is under the
rubber cap.
The first LED at the rear side of
the worklight starts flashing and
indicates that the battery is
charged. After some time the
other LEDs will also flash.
When all LEDs flash the rechargeable
battery is fully charged. One LED is
equal to 25 % charging capacity.
2. After charging process, disconnect the USB cable from the work-
light.
Hint: During charging, the worklight must not be operated.
Checking the Battery Capacity
To check the battery capacity, press the ON/OFF button (2) once.
You will hear a click sound.
When 3 – 4 LEDs turn on, the battery is fully charged. When only one
LED turns on, the battery has to be re-charged again.
The LEDs turns off automatically after approx. 6 seconds.
All manuals and user guides at all-guides.com
Operation
1
USB-Port
2
ON/OFF Button
3
LED
10
1
2
3
Publicité
