Andrew James AJ001326 Mode D'emploi page 9

Slicing Disc, Shredder Disc & French Fries Disc
Choosing Your Disc
1. Take your desired disc and slot over the central plastic cylinder of the disc holder
2. Gently push down on the disc until you hear it lock into place
Changing Disc
1. Gently pull the hook over the clip
2. Repeat "choosing your disc" instructions above
Assembly
1. Position the drive shaft on motor base
2. Slot the processing bowl over the drive
shaft and turn clockwise to lock into place
on the motor base
3. Place disc holder onto the drive shaft
4. Place cover on bowl
5. Turn cover clockwise until cover interlocks
on bowl.
6. Put food into the feeding chute. Use
pusher to push the food down for
processing
Disassembly
1. Switch off the appliance.
2. Remove the bowl cover by clasping the
feeding tube and rotating the bowl cover
anti-clockwise to unlock it from the bowl
3. Remove the disc holder to empty the
ingredients
4. Unlock the bowl from the power unit by
rotating it anti-clockwise using the handle
5. Remove the drive shaft and clean the
appliance as instructed in the cleaning
section of the manual
All manuals and user guides at all-guides.com
9