Andrew James AJ001326 Mode D'emploi page 8

Kneading Disc/Emulsifying Disc
Assembly
 Position the drive shaft on the motor base.
 Slot the processing bowl over the
drive shaft and turn clockwise to
lock into place on the motor base.
 Place the blade adaptor onto the
drive shaft.
 Take the required disc and place
onto the blade adaptor, the bigger
blade should go on first.
 Place cover onto the bowl and turn
clockwise until the cover interlocks
on bowl.
 Use the pusher to push food into
feeding chute.
Disassembly
1. Switch off the appliance.
2. Remove the bowl cover by clasping
the feeding tube and rotating the
bowl cover anti-clockwise to unlock
it from the bowl.
3. Remove the disc and blade adapter
to empty the ingredients.
4. Unlock the bowl from the power
unit by rotating it anti-clockwise
using the handle.
5. Remove the drive shaft and clean
the appliance as instructed in the cleaning
section of the manual.
All manuals and user guides at all-guides.com
8