autoright SteamMachine Manuel D'instructions page 6

Steam Gun Operation
1
TRIGGER
ON
The steam output is controlled through the
steam gun. The gun has both a steam trigger
and red safety switch.
For intermittent steam generation press the red
safety switch to the ON position. Pull the trigger
to release steam.
Rebuilding Steam Pressure While in Use
1
If the orange steam light comes on during use, it
indicates the machine needs to re-build pressure
in the tank.
WARNING:
Burns can occur from hot water or steam.
DO NOT touch the steam nozzle or attempt to
connect accessories while unit is in use.
NEVER direct the steam at a person, pet or
electrical device.
English
6
All manuals and user guides at all-guides.com
2
For continuous steam generation:
(A) Press the red safety switch to the ON
position. Hold down the steam trigger.
2
Make sure the trigger on the steam gun is in
the open position and the switch is in the OFF
position. It should take approximately 40 seconds
to re-build pressure.
3
(B) While holding down the trigger, press the
safety switch to LOCK. The trigger is now
locked into continuous steam mode.
To unlock from continuous steam mode, press
the red safety switch to the ON position.
HAZARD:
HOT STEAM AND PARTS.
May cause injury, including skin burns
or property damage. Temperatures
exceed 212˚ F (100˚ C).
www.auto-right.com