TaoTronics TT-AH004 Mode D'emploi page 5

3. Humidity Level: Touch the Humidity Level button to set the humidity
level from 40% - 95% by a 5% difference of each tap. When the room
humidity level is higher than that of the preset level, the unit will
automatically turn off. Otherwise, misting will continue until the room
humidity level reaches the preset level.
4. Delay Start Timer: Tap on the Delay Start Timer button to set the start
delay from 1 hour to 24 hours.The timer LED flashes three times to start
the countdown and the unit will turn on according to the set time.When
the timer mode is activated, all buttons are disabled except the Power
and Auto Off Timer button.
5. Auto Off Timer: Set the Auto Off Timer to between 1 hour to 24 hours.
The timer LED flashes three times to start the countdown and the unit will
shut off automatically when the set time is up. When the timer mode is
activated, all buttons are disabled except the Power and Delay Start
Timer button.
6. Sleep Mode: Tap on the Sleep button to activate sleep mode. Only
the Sleep Mode icon will be shown on the display screen and the unit
enters energy-saving mode with its lowest mist output.The button buzzer
will shut off and the Control Panel will turn off in one minute. In sleep
mode, all buttons are disabled except the Power button.
Important
- Do not over ll when adding water.
- Stop using when the water level is low.
- Do not power on the humidi er when the water tank is not in place.
- Never add water hotter than 40°C/104°F to avoid any possible damage
or malfunction of the device.
- Do not pour the water through the mist outlet. Wipe off any water outside
the body with a dry cloth.
- When the room temperature is 0°C/30°F or below, please empty the
water from the unit. Ice can damage the components.
All manuals and user guides at all-guides.com
- Do not place metals, chemicals, or detergents into the water to avoid any
possible damage or malfunction of the device.
- When the water tank is full, do not move it as the water might overflow or
flow into the circuit and damage the device.
- After usage, turn the unit off and unplug it from the power outlet.
- Never pour out the water remaining in the water tank without the power
rst turned off and unplugged from the socket.
Cleaning the Water Tank
• Before cleaning, make sure that the unit is turned off and unplugged
from the power socket.
• Clean the water tank regularly (recommended once every 2-3 weeks) -
unscrew the water tank plug, wipe off the limescale in it and rinse off
with clean water.
• Cleaning of the base (recommended once a week) - if there is
limescale on the water base, wipe the base with a soft cloth dipped with
a mild cleaning agent and rinse off with clean water.
• External cleaning - rinse a soft cloth in warm water and wipe off surface
stains.The spray nozzle can be flushed with tap water directly.
• Storing the humidi er - when the unit is not going to be used for a long time,
clean and dry the unit and store it in a dry place in the original package.
Caution
• Please do not repair the product by yourself, always ask a professional
electrician or authorized technician for repairs.
• If you notice an unusual odor, please turn off the unit immediately.
• Please do not remove the power plug with wet hands as it may cause
electrical shock.
• Do not place this unit on a slope or uneven surface to avoid water
leaking or component damage.
05/06