Publicité
Liens rapides
U P
®
ASME A112.18.1 / CSA B125.1
NSF-61
ICC/ANSI A117.1
Model/Modelo/Modèle
3540
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
L
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
C
®
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
TWO HANDLE WIDESPREAD
53913
LAVATORY FAUCETS
LLAVES DE LAVAMANOS
EXTENDIDAS DE DOS MANIJAS
ROBINETS À ENTRAXE LONG À
DEUX POIGNÉES POUR LAVABO
T E FLO N
T E FLO N
L
53913
1
3/32" (2.38mm)
?
8/24/09
Rev. C
Publicité
Manuels Connexes pour Delta 3540 Serie
Sommaire des Matières pour Delta 3540 Serie
- Page 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
- Page 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
- Page 3 3540 Series/Series/Seria RP42587▲ RP42581▲ End Valve Assembly-WF Lift Rod Finial Ensamble de la Válvula Final Pomo de la barra Embase avec Joint Soupape de alzar Grain de la Tirette RP42586▲ Spout Assembly RP6060, RP6060SB Ensamble del Tubo de Salida Bonnet Nuts Bonetes/Capuchones Chapeaux Filetés RP24097...
- Page 4 RP38958 (3540-240 Only / Sólo / Seulement) Pop-Up Assembly Less Lift Rod (3540-240 only) Ensamble del Desagüe Automático sin la barra para alzarlo Renvoi mécanique sans la tirette RP5648 Stopper Tapón Bonde Metal Flange Brida de Metal RP12516 Collerette en métal Strap &...
- Page 5 Slide hot (1) and cold (2) end valves with gaskets (3) through sink. Install the spout (1) and gasket (2). Secure with washer and nut (3). Note: If sink is uneven, use silicone under the gasket. Note: hot side end valve is labeled (4)! Secure end valves with nuts and washers (5).
- Page 6 Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull Remove stopper (1), brass nut & washer (2), Remove pivot nut (1). Install horizontal rod black gasket (3) and tail piece (4). pop-up straight down into drain hole and (2) and stopper (3) as removable (4) or secure gasket (2), brass nut and washer (3).
- Page 7 Step 3b Step Step 3c Remove pivot nut (1). Install horizontal rod (2) and Metal Pop-up Apply silicone to underside of flange (1). stopper (3) as removable (4) or non-removable (5). Insert body (2) into sink. Screw flange (1) Remove stopper (1) and flange (2). Hand tighten pivot nut (1).
- Page 8 1/2" (13 mm) IPS Make Connections to water lines: Remove aerator (1) and turn faucet handles (2) all the way on. Turn on hot and cold water supplies (3) and flush water lines for Choose hook-ups for 1/2" I.P.S. connections: one minute.