Télécharger Imprimer la page

Airworks 16MPWA Manuel D'utilisation page 5

Publicité

Les langues disponibles

Les langues disponibles

1. Follow cleaning instructions 1-4 above. Make sure to disassemble and clean fan before storing.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the fan as it could cause the cord
to fray or break.
If your fan fails to operate, please follow these procedures prior to contacting customer service:
PROBLEM
Fan is not turning on.
Oscillation function is not
working.
Fan is on but air coming out
of it is not strong enough.
If the problem still persists, refer to the warranty. For further instructions, call 1-800-268-7622 or
visit
www.super-electric.com
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD VOID
THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
AIRWORKS
16MPWA
TROUBLESHOOTING
PROBABLE CAUSE
Fan is not plugged into a 120V
AC, 60Hz polarized
outlet/receptacle.
Breaker/fuse has been tripped.
The oscillation knob has not
been activated.
There is dust built up at the
back of the fan.
with the model number of this fan ready for the service center.
STORAGE
SOLUTION
Ensure unit is in the OFF position. Plug in
unit and attempt to turn on again.
Please check your electrical box to confirm
the breaker has not been tripped. Ensure
unit is in OFF position. Plug in unit and
attempt to turn on again.
Attempt to plug unit in another receptacle
in the house.
Simply press the oscillation knob down to
start the oscillation function. This can be
done while the fan is operating.
Turn fan OFF and unplug. Using a soft, dry
cloth, wipe the back of the grille to remove
any dust build-up. Plug in unit and turn fan
back ON to resume normal operation.
5

Publicité

loading

Produits Connexes pour Airworks 16MPWA