Publicité
Les langues disponibles
Les langues disponibles
Operation
Turning the TV On and Off
Plug and Play Feature
Press the POWER
button on the remote control.
You can also use the POWER
When the TV is initially powered on, several basic settings proceed automatically and subsequently.
The following settings are available.
1.
Press the POWER
button on the remote control.
The message "Plug & Play" is displayed.
2.
Select the appropriate language by pressing the
Press the ENTER
button to confirm your choice.
3.
The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
button.
Please check that the antenna cable is connected correctly.
4.
Press the
or
button to select "Air", "STD", "HRC", or "IRC", then press the ENTER
5.
Press the ENTER
button to select "Start".
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
ENTER
Press the
6.
Press the ENTER
button.
Press the
or
button to move to the "Hour", "Minute" or "am/pm".
Set the "Hour", "Minute" or "am/pm" by pressing the
7.
Press the ENTER
button to confirm your setting.
The message "Enjoy your watching." is displayed.
• Language: Select your language.
• Air/Cable: Select your local cable company TV system.
• Auto Program: Selects between terrestrial antenna connection or your local cable company TV system.
The TV automatically cycles through all of the available channels and stores them
in memory. This takes about one to two minutes.
• Clock Set: Sets the current time for the TV clock.
You can also set the hour and minute by pressing the number buttons on the remote control.
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the ENTER
2.
Press the ENTER
button to select "Plug & Play".
3. This will change or reset the settings.
English-11
button on the front of the panel.
or
button at any time to interrupt the memorization process.
button.
or
button.
button.
button.
Publicité
