Publicité
Les langues disponibles
Les langues disponibles
Owner's manual
5. When the device is charging, charging indicators flash.
6. When the device is fully charged, charging indicators are on. After
some time, they go off automatically.
7. When the charging process has finished, disconnect the AC charger
from the mains supply and device's charging socket.
Notes:
• Before first use make sure the battery is fully charged.
• During charging the AC charger may become warm- this is a normal
behavior.
• Use only the included charger to charge the battery.
• After each use fully charge the battery and store the device fully
charged.
• It is recommended to completely discharge the battery at least once
a month and then fully charge it to maintain optimal performance.
• When you notice power drop, charge the device.
• When during charging battery temperature exceeds 55°C, the
charging process will be automatically stopped until battery
temperature drops to a safe level, that is ≤45°C.
The device has two speed levels:
•
Mode 1 – low power (the device has a longer run time)
• Mode 2 – high power (the device has more power for a shorter run
time)
Press and hold Power button to turn on the device in Mode 1.
Press and hold for the second time to switch to Mode 2.
Stick vacuum cleaner
Note: Before each use it is recommended to check that the wheels and the
brush roll are clean from sharp objects in order to avoid scratching sensitive
floors and to ensure cleaning performance.
1. Insert handheld vacuum cleaner into the stick vacuum cleaner.
2. Press and hold Power button to turn on the device (press for the second
time to switch to Mode 2 if desired).
3. Start vacuuming.
4. To turn off the device, press and hold Power button again.
OPERATION
25
EN
Publicité
