NEC MultiSync LCD2180UX Mode D'emploi page 7

Quick Start
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid knocking
the screen on the desk or pinching your fingers. To raise the screen, place hands
on each side of the monitor and lift up to the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn
clockwise from Landscape to Portrait or counter-clockwise from Portrait to
Landscape (Figure R.1).
To toggle the orientation of the OSM menu between Landscape and Portrait
modes, refer to the "Controls" section, "OSM Rotation" function.
Tilt
Grasp top and bottom sides of the monitor
screen with your hands and adjust the tilt
as desired (Figure TS.1).
NOTE: Handle with care when tilting the monitor screen.
LCD2180UXManual1020.p65
–continued
Figure R.1
Swivel
Grasp both sides of the monitor screen
with your hands and adjust the swivel
as desired (Figure TS.2).
5
5 10/21/03, 9:10 AM