Publicité
b) antenna cover
c) display assembly
d) wireless card
e) battery
f) base cover
5. Follow the procedures in After Working Inside Your Computer.
Removing the palm-rest assembly
1. Follow the procedures in
2. Remove the:
a)
base cover
b)
battery
c)
memory modules
d) Follow the procedure from step 1 to step 4 in
e)
wireless card
f)
speakers
g)
heat-sink
h)
fans
i)
display assembly
j)
power-adapter port
k)
system board
l)
keyboard
After performing the steps in the prerequisites we are left with the palm-rest assembly.
a. palm-rest assembly
Installing the palm-rest assembly
1. Place the palm-rest assembly on a clean and flat surface.
2. Install the:
a) keyboard
b) system board
c) power-adapter port
d) display assembly
e) fans
f) heat-sink assembly
g) speakers
h) wireless card
i) Follow the procedure from step 3 to step 6 in "Replacing the hard drive".
28
Retrait et installation de composants
Before Working Inside Your
"Removing the hard drive
Computer.
Publicité
