Télécharger Imprimer la page

QSC AcousticDesign AD-C81Tw Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Specifications
1
Frequency Response
:
2
Maximum Output
:
(calculated)
Transducers:
Nominal Coverage:
Impedance (ohms):
3
Power Rating
:
rms (IEC 100 hrs):
recommended amp power:
Sensitivity:
Bass Loading:
Optional Processing:
Dimensions:
Net Weight:
Enclosure:
Corrosion-resistant power coated steel enclosure with injection-molded plastic baffle. Press on metal
grille
Mounting System:
Connectors:
Controls:
Transformer Distortion: less than .01% THD above 100Hz, 0.2% @ 50Hz (30W tap). Bandwidth: 40 - 20k
Agency Listings:
Specification Notes:
1- All frequency ranges specified refer to measured half-space response (2 pi).
2- Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
For detailed information, visit QSC's web site at http://www.qscaudio.com or call us at 1-800-854-4079 (toll-free USA only)
All manuals and user guides at all-guides.com
AD-C81Tw
50- 200k Hz (-3 dB), 25- 200 Hz (-10 dB)
112 dB SPL continuous rms output
118 dB SPL peak output
LF: 203 mm (8"), 19 mm (0.75") voice coil;
180° conical (average 2.5 kHz - 10 kHz)
8.0 nom./ 8.3 min. @ 42 Hz.
100 watts rms (100 watts)
200 watts rms, maximum
92.0 dB, 1 watt, 1 meter, flush mounted (2 pi)
ported, tuned to 42 Hz
125 Hz. low pass >12 dB/octave xover.
see drawings
AD-C81Tw: 9.1 kg (20.0 lb.)
Captive, integral mounting clamps. Insert enclosure into cutout, and tighten. Suspended ceiling C-ring
and support bars included.
Ceramic block connector inputs and terminal block "through" connectors (rated for 400W max).
Transformer "tap" selector/ bypass (8 ohm) switch, settings: 7.5, 15, 30, and 60 watts (15, 30, 60 watts
for 100V) and 8 ohms. Averaged over 50Hz - 20kHz bandwidth (60W tap).
Hz (-1dB, all taps).
CE, UL 1480 (commercial/professional use, outdoor damp), UL 2043 (air handling spaces).
Specifications are subject to change without notice.

Publicité

loading